SGT-100

The SGT-100 industrial gas turbine is a proven unit for all electrical power generation and mechanical drive applications.

The compact arrangement, on-site or off-site maintainability, and inherent reliability make it an ideal gas turbine for the demanding oil and gas industry. The gas turbine has a rugged industrial design that enables high efficiency and excellent emissions performance on a wide range of gaseous and liquid fuels.

template-360-siemens

With the SGT-100 your plant will benefit from world-class availability in addition to maximum operational flexibility. The standard Dry Low Emissions (DLE) combustion system can operate on both liquid and gaseous fuels with low levels of NOₓ and CO emissions. At the same time, it allows for full load acceptance and shedding with automatic fuel changeover – without affecting turbine operation.

Ingenious design to the core

The SGT-100 features a 10-stage axial flow transonic compressor incorporating the latest aerodynamic technologies. The robust design gives optimized performance over a wide range of operating conditions. For power generation, the single-shaft design has a 2-stage turbine. For mechanical drive, the twin-shaft design has a single compressor turbine stage with a 2-stage free power turbine. The overall design of the gas turbine is uniquely simple.

SGT-100 packages

The health and safety of the operation and maintenance staff are paramount. This is why our SGT-100 packages are designed with a special emphasis on, e.g., walkways and handrails, noise suppression, access doorways, and safety interlocks.

The SGT-100 packages are compact and easy to transport, install and maintain.
The package includes the gas turbine, the gearbox, the driven unit and all fluid modules, mounted on a base frame. The factory-tested and certified fluid system modules come fully wired into the package's control systems.

Comprehensive services to support you

Our comprehensive portfolio of services provides low life cycle cost and optimum performance throughout the turbine’s life cycle: Long Term Programs (LTP), overhaul service, field service, spare parts, service exchange, remote diagnostic service, and modernization and upgrades.
Whether for scheduled service or short-term support, our specialists are there for you, on-site all over the world.
The SGT-100 package is designed for easy maintenance: Large side doors offer easy equipment access and facilitate changing the core engine. When your gas turbine is serviced, you can opt for exchanging the core engine for a replacement or on-site maintenance. The package includes on-site maintenance lifting beams.

Fuel package

The SGT-100 offers a dual-fuel capability for all applications and can be operated with a range of gaseous and liquid fuels. It is designed to meet your individual operating criteria including reliable starting and changeover between fuels. The automatic changeover from the primary to the secondary fuel can be executed at any load.

The engine has a hydrogen (H2) capability of up to 30 vol% (with DLE burners), or up to 65% (with diffusion burners with unabated NOx emissions).

	5.1 MW version	5.4 MW version
Power output	5.1 MW(e)	5.4 MW(e)
Fuel*	Natural gas, liquid fuel, dual fuel	Natural gas, liquid fuel, dual fuel
Frequency	50/60 Hz	50/60 Hz
Gross efficiency	30.1%	30.2%
Heat rate	11,945 kJ/kWh (11,322 Btu/kWh)	11,613 kJ/kWh ( 11,292 Btu/kWh)
Turbine speed	17,384 rpm	17,384 rpm
Pressure ratio	14.0 : 1	15.6 : 1
Exhaust mass flow	19.5 kg/s (43.0 lb/s)	21.0 kg/s (46.3 lb/s)
Exhaust temperature	544 °C (1,011 °F)	549 °C (1,020 °F)
NOₓ emissions**	≤ 15 ppmvd	≤ 15 ppmvd

Power output	5.7 MW
Fuel*	Natural gas, liquid fuel, dual fuel
Efficiency	33.3%
Heat rate	10,803 kJ/kWh (10,195 Btu/kWh)
Drive shaft speed	6,500 –13,000 – 13,650 rpm
Pressure ratio	14.4 : 1
Exhaust mass flow	19.4 kg/s (42.7 lb/s)
Exhaust temperature	545° C (1,013° F)
NOₓ emissions**	≤ 25 ppmvd

	Power generation package	Mechanical drive package
Approx. weight	34,927 kg (77,000 lb)	26,944 kg (59,400 lb)
Length	11.9 m (39.0 ft)	6.1 m (18.5 ft)
Width	2.7 m (9.4 ft)	2.7 m (9.0 ft)
Height	4.0 m (13.0 ft)	4.9 m (16.0 ft)

SGT-100 gas turbine

Engineered for demanding applications.

SGT-100 gas turbine highlights

Ingenious design to the core

SGT-100 packages

Oil and gas power generation package

Industrial power generation package

Mechanical drive package

Comprehensive services to support you

Axial blade attachment

Easy combustor maintenance

Maximum fuel capability with minimum environmental impact

Fuel package

Technical data

Performance data for simple cycle power generation

Performance data for mechanical drive

Physical dimensions and weight

The SGT-100 is suitable for the following applications and industries:

Find out more about our products and services

Brochures

Gas turbine portfolio (interactive PDF)

Articles and papers

Download Poster

SGT-100 Poster

Satisfied customers worldwide: SGT-100 reference highlights

SGT-100 gas turbine

Engineered for demanding applications.

High availability and operating flexibility

Long oil and gas tradition

Designed for arduous conditions

DLE combustion for low NOₓ emissions

On-site and off-site maintainability

Suitable for a wide range of applications